MCU TL 1gang reversed 24/24

The MCU TL 1gang reversed 24/24 is used to control motors with 12 or 24 V DC. It enables your sun shading products to be controlled with a time logic. This means that if you press and hold the button for two seconds, the blind will continue to move until the end position has been reached or a counter button has been pressed. This increases comfort and ensures intuitive operation. 

control unit time logic for DC motors

Technical data

  • Supply voltage: 20 to 35 V DC
  • Current consumption: 26 mA DC
  • Rated voltage: 12 or 24 V DC
  • Rated current: 3 A DC
  • Control voltage: 20 to 35 V DC
  • Connection type: screw terminals
  • Protection class (surface-mounted): IP54
Data sheet

Function description

The MCU TL 1gang reversed 24/24 is used to control motors with 12 or 24V DC. The control cable is looped, i.e. run from control unit to control unit and connected to it on site.  The control and motor voltages are supplied via upstream power supply units.

Operation is via a control unit and/or push-buttons. The time logic for DC motors has a time logic. This means that after the push-button has been held down for two seconds, the blind continues to move until it has reached the end position or a push-button has been pressed.

 

Article Name Case Dimensions
200053 MCU TL 1gang reversed 24/24 None L75 x B75 x H20 mm
200054 MCU TL 1gang reversed 24/24 FM flush-mounted L106 x B106 x H57 mm
200055 MCU TL 1gang reversed 24/24 SM surface-mounted L131 x B131 x H60 mm